Crater® M and H – OPEN GEARS & WIRE ROPES

Home|Industrial lubricants|Crater® M and H – OPEN GEARS & WIRE ROPES

Crater H & M

Crater M and H are heavy-duty and highly adhesive open gear, chain, and wire rope lubricants, produced to protect against wear, rust, and to resist and displace water. Recommended for Wire ropes, Open gears in mining, quarrying, construction and dredging equipment, Chains and sprockets, Flexible couplings, Sliding surfaces on draglines, and shovels.

Suitable for application by brushing, swabbing, dipping, spraying, drip cup or spout-type can. Spray application may be by conventional drum pump and spray nozzle equipment designed for fluid lubricants and greases.

  • Protects metal surfaces
    High load-carrying capacity and adhesive properties of the residual base oil ensures that a tough, durable lubricating film is maintained on exposed gears and surfaces to protect against wear under adverse conditions.
  • Tenacious lubricant coat
    Protects exposed metal surfaces against the elements. The special compounding components provide additional rust protection by resisting water washout.
  • Quiet operation of gears
    Highly cohesive lubricant coating remains pliable and effectively cushions gears and contacting surfaces.
  • Easily and safely applied
    High flash point, chlorine-free solvent allows the product to be sprayed through automatic spray nozzle equipment, or applied by dipping, brushing, or swabbing, leaving a viscous adhesive oil film after evaporation of the solvent.

Applications :

Can include-

  • Wire ropes
  • Open gears (e.g., mining, quarrying, construction, and dredging equipment)
  • Chains and sprockets
  • Flexible couplings
  • Sliding surfaces (e.g., draglines and shovels)

Suitable for application by brushing, swabbing, dipping, spraying, drip cup or spout type can. Spray application may be by conventional drum pump and spray nozzle equipment designed for fluid lubricants and greases.

Grade Selection

The selection of the appropriate grade depends on the severity of the application and the operating temperature. Grade H has a higher film strength for severe-duty service or where operating temperatures are high.

FOR ADDITIONAL CONTACT: SUPER EDGE  TEL: +971-56-5003416 Email – info@superedgeme.com